Latex gloves features
Latex gloves are suitable for car manufacturing, battery manufacturing; FRP occupation, aircraft installation; aerospace industry; environmental cleaning and cleaning. Latex gloves have abrasion resistance, puncture resistance; acid and alkali resistance, grease, fuel oil and various solvents; have a wide range of chemical resistance, good oil resistance; FDA certified.
Latex gloves feature unique fingertip grain planning, greatly enhance grip, effectively avoid slipping; no palm print patent planning, uniform glue penetration, enhanced protection; unique hand planning, cotton lining, improved comfort.
The rubber is first sliced by a rubber mixing machine, and then sliced and sent to a sol cylinder and a gasoline mixed sol. The sol is then emulsified and conditioned to pump the latex center can. The rubber solution dissolved in gasoline is fed from the top of the distillation column, heated by steam distillation, and the light component gasoline is heated to a gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler. The oil-water mixture is then transferred to the oil-water separator and the oil moisture layer. The upper layer of gasoline is recovered, and the lower part of the water is pumped to the cooling tower for cooling. After cooling, the gas gasoline of the distillation tower is cooled. The distillation tower is fed to the latex mixing tank according to its own pressure, and then prepared to separate the latex material of the glove by the centrifuge. After being toned and filtered, it is ready for use.